AirGorilla™ 
Natural Evolution -
A More Powerful Air Purifier with Advanced Technologies Endorsed by Authorities, Easy to Install, and at the Right Price!
- Two 16”, Dual Radiant UV lamps produce over five times the intensity and 50% greater coverage area than the typical 12-15”UV lamp installed in a duct system.
- Easily installed – only cut one hole.
- Maintenance free – lamp and filter screen never needs cleaning.
- Lethal to viruses and bacteria, except some spores.
- Destroys VOCs.
- Eliminates odors.
- No Ozone!
- Extensive Warranty – 5 years for unit and 9,000 hours for lamps.
- Front panel provides operational status of: 1) Power On 2) UV lamp operational and 3) Replace UV lamp indicator.
Part # PCO/UV N-DUCT Order
Good
The power of ultraviolet light (UV) is undeniable. It has been studied since the 1930s. Today, UV devices have become popular for general indoor air improvement, and in particular, are well accepted for installation into HVAC ventilation systems.
In general, UV light can control microbial growth on evaporator coils and internal duct surfaces through direct and continuous exposure. Elimination of biological contaminants from the coils can decrease the spread of biological contaminants into the occupied spaces, reduce maintenance of the equipment and reduce energy consumption.
However, the efficiency of the UV light is determined by the intensity of the UV rays.
Intensity of the UV rays can decrease, dramatically, just a short distance from the lamp. *In general, single UV lamps are ineffective at destroying contaminants as they are propelled throughout the ventilation system.
Better
In general, dual UV lamps are more effective than single lamps. Dual lamps are necessary to satisfy the required intensity of larger central air-conditioning/heating systems.
Best
Technology so Powerful It's used on Nuclear Submarines!
Why is the AirGorillaTM so powerful?
AirGorillaTM combines the power of two highly regarded pollutant fighting technologies – ultraviolet light (UV) and photocatalytic oxidation (PCO). This process involves shining ultraviolet light on to a surface coated with titanium dioxide.
The process produces free radicals, which attack molecules of contaminated compounds (VOCs) in the air. Including those which cause odors.
These are broken down into simple, harmless substances, usually water and carbon dioxide. The free radicals have the additional benefit of killing bacteria, viruses and spores.
AirGorillaTM has developed a way that makes the technology even more powerful, dramatically improving its performance. The enhanced power provides far greater pollutant destruction that results in significantly improved indoor air quality.
· Ti02 Grid:The nano-technology titanium dioxide mesh grid produces maximum destruction of airborne pollutants with minimum resistance to airflow.
· Dual Lamps: Two 16”, Dual-Radiant UV lamps produce over 5 times the intensity and over 50% greater coverage area than the typical, single 12-15” lamp.
· Operational LED’s: Advanced electronics lets you know power is on, UV lamps are on and operational, and most importantly, when the lamps need replacing.
· Safe: The process produces no chemicals, including ozone.
· Easily Installed: Cut just one hole and install in the supply or return duct.
· Maintenance Free: The highly effective grid automatically cleans and renews itself – it never needs cleaning.
· Service is a Snap: Simply open the Control Module door, remove and replace lamp in less than a minute.
· Extensive Warranty: All power module components are warranted for 5 years. Dual UV lamps 9,000 hours.
Easy to Install (click here for installation guide)
AirGorilla’s PCO/UV N-Duct™ unit can be installed in any duct at least 17” wide. It is easily installed and can be located in the supply or return plenum and positioned vertically or horizontally. Like installing a single UV lamp, only one cut is needed - a rectangle hole of 5” x 11” (template provided) - no duct modifications.
PCO/UV N-Duct™ units can be plugged into an AC outlet (option 1); or wired into an AC source so that it is “ON” continually (option 2); or wired directly into your HVAC control panel (option 3) so that it operates when the FAN control on the thermostat is “ON”.
AirGorilla PCO/UV N-Ducts™ can be quickly installed in the supply or return ducts.
To further enhance IAQ, installing UV lamps like AirGorilla’s UV N-Ducts (non-PCO) in the center or outside of the A coil should be considered.