|
AirGorilla™
|
improved performance for Your
customers |
Natural Evolution -
|
PCO/UV
In-Duct
Air Cleaner
|
A More
Powerful Air Purifier with Advanced Technologies Endorsed by Authorities, Easy to Install, and at the Right Price!
Part # PCO/UV N-DUCT
Order
Good
The power of ultraviolet light (UV) is undeniable. It has been studied
since the 1930s. Today, UV devices have become popular for general indoor air improvement, and in particular, are well accepted for
installation into HVAC ventilation systems.
In general, UV light can control microbial growth on evaporator coils and
internal duct surfaces through direct and continuous exposure. Elimination of biological contaminants from the coils can decrease the
spread of biological contaminants into the occupied spaces, reduce maintenance of the equipment and reduce energy consumption.
However, the efficiency of the UV light is determined by the intensity of the
UV rays.
Intensity of the UV rays can decrease, dramatically, just a
short distance from the lamp. *In general, single UV lamps are ineffective at destroying contaminants as they are propelled throughout the
ventilation system.
Better
In general, dual UV lamps are more effective than single
lamps. Dual lamps are necessary to satisfy the required intensity of larger central air-conditioning/heating systems.
Best
Technology so Powerful It's used on Nuclear Submarines!
Why is the AirGorillaTM
so powerful?
AirGorillaTM
combines the power of two highly regarded pollutant fighting technologies – ultraviolet light (UV) and photocatalytic oxidation (PCO).
This process involves shining ultraviolet light on to a surface coated with titanium dioxide.
The process produces free radicals, which attack
molecules of contaminated compounds (VOCs) in the air. Including those which cause odors.
These are broken down into simple,
harmless substances, usually water and carbon dioxide. The free radicals have the additional benefit of killing bacteria, viruses and
spores.
AirGorillaTM
has developed a way that makes the technology even more powerful, dramatically improving its performance. The enhanced power provides far
greater pollutant destruction that results in significantly improved indoor air quality.
· Ti02
Grid:The
nano-technology titanium dioxide mesh grid produces maximum destruction of airborne pollutants with minimum resistance to airflow.
·
Dual Lamps:
Two 16”, Dual-Radiant UV lamps produce over 5 times the intensity and over 50% greater coverage area than the typical, single 12-15” lamp.
· Operational
LED’s: Advanced electronics lets you know power
is on, UV lamps are on and operational, and most importantly, when the lamps need replacing.
· Safe:
The process produces no chemicals, including ozone.
· Easily
Installed: Cut just one hole and install in the
supply or return duct.
· Maintenance
Free: The highly effective grid automatically
cleans and renews itself – it never needs cleaning.
· Service
is a Snap: Simply open the Control Module door,
remove and replace lamp in less than a minute.
· Extensive
Warranty:
All power module components are warranted for 5 years. Dual UV lamps 9,000 hours.
*Owner's
Guide
Back to Top
Easy to Install
(click
here for installation guide)
AirGorilla’s PCO/UV N-Duct™ unit can
be installed in any duct at least 17” wide. It is easily installed and can be located in the supply or return plenum and positioned
vertically or horizontally. Like installing a single UV lamp, only one cut is needed - a rectangle hole of 5” x 11” (template provided) -
no duct modifications.
PCO/UV N-Duct™ units can be plugged
into an AC outlet (option 1); or wired into an AC source so that it is “ON” continually (option 2); or wired directly into your HVAC
control panel (option 3) so that it operates when the FAN control on the thermostat is “ON”.
AirGorilla PCO/UV N-Ducts™ can be quickly installed in the supply or return ducts.
To further enhance IAQ, installing UV lamps like AirGorilla’s UV N-Ducts (non-PCO)
in the center or outside of the A coil should be considered.
|
