Two 16”, Dual Radiant UV lamps produce over five times the intensity and
50% greater coverage area than the typical 12-15”UV lamp installed in a duct system.
Easily installed – only cut one hole.
Maintenance free – lamp and filter screen never needs cleaning.
Kills and decomposes airborne bacteria, viruses, and mold spores and
reduces second hand cigarette smoke.
Reduces gaseous pollutants and associated odors.
Eliminates odors.
No Ozone!
Extensive Warranty – 3 years for unit and 9,000 hours for lamps.
Front panel provides operational status of: 1) Power On 2)
UV lamp operational and 3) Replace UV lamp indicator.
The AirGorilla CPU™ adjusts
in depth so that only two sizes of the CPU™ are needed to fit the 4 most popular duct sizes:
16"H x 7.25" W x 20"-25" D (adjustable)
20"H x 7.25" W x 20"-25" D (adjustable)
Photocatalytic Oxidation (PCO) Filter
- The
nano-technology titanium dioxide mesh filter produces maximum destruction of airborne contaminants when illuminated by the ultraviolet
lamps and destroys biological contaminants, neutralizes gases and odors.
Ultraviolet Light -
Contains two, 36 watt,
Dual-Radiant Lamps. Provides over 5 times the killing power of the typical, single 12" UV lamp.
Filter -
The CPU™ does not come with a filter. Filter
selection is at the discretion of the installer and should be determined by the air quality needs of the client. Any 1" filter that is
UV tolerant fits into the CPU™.
Operational LEDs
- Advanced electronics that lets you
know Power is On, UV lamp is on and working, and most importantly, when the UV lamp needs to be replaced (along with an audible
reminder).
Service is a Snap
- To replace filter - open door,
pull out old filter, insert new one. To replace UV lamps - open the cover and pull out old lamps, insert new ones. Complete service
takes less than 1 minute.
The AirGorilla UV N-Duct unit features a 16-inch Dual-Radiant,
36 watt lamp producing 105 μw of UV power - that’s double the output of the typical 14" UV lamp installation. More power means greater
destruction of contaminants.
Multi-Voltage Input Power Supply -
The multi-input voltage ballast (120 - 277 VAC) allows for
greater flexibility for electrical connections. The power supply is housed in a compact enclosure of only 3.25" X 6".
UV Lamp Mount -
The remote lamp mounting plate is compact at only 3.25"
X 4.75". It features AirGorilla’s innovative design that makes lamp replacement a snap. Don’t have to unscrew or unfasten unit to
replace lamps - simply open the cover.
Connection Versatility -
The power cord to the ballast enclosure is detachable. The ballast
enclosure also contains a second power receptacle allowing for the units to be connected in series. This allows two or more units to
be connected as shown to the right but only requiring one unit to be wired into a power source. The versatility of the unit means only
one unit needs to be stocked to meet the majority of single or multiple UV lamp installations.
One way to increase efficiencies without increasing pressure drop is to
extend the media surface.
Extended Surface Pleats out perform standard panel filters with higher
efficiency and lower pressure drop.
Effective service life can be extended up to 4 times the life of flat panel
filters.
A+2000 Pro Pleats are available in MERV 8 & MERV 11 efficiencies.
(The American Lung Association recommends filters with a MERV 10 efficiency or greater).
All Rights Reserved 2007-2010. This site is the
property of Filtration Manufacturing, Inc. Any use of the text or images, without permission of FMI, is expressly prohibited.